Disk setup, Format – OpenEye OE3 E-Series User Manual
Page 30
30
Disk Setup
Shows installed Hard Disk Drives and the status of other attached storage devices.
To format a Hard Drive or USB device, use the arrow keys to select the appropriate device
and press
ENTER
. Select
FORMAT
and press
ENTER
. Select
YES
to confirm and press
ENTER
.
Refer to the list of Approved USB Flash Drives in the Introduction chapter.
To refresh the list of connected USB devices select
RESET
and press
ENTER
.
All USB devices must be formatted as FAT32 before using with the recorder.
When formatting a drive, all video and other data stored on that drive will be
permanently erased and cannot be recovered.