OpenEye Gen6 X-Series Hardware Manual - Manual (Page 19)

MONITOR SETUP
These connections are available to connect a monitor:
HDMI Output To TV / Digital Display
VGA Output To TV / Analog Monitor
DVI-D Output To TV / Digital Display
Display Port To TV / Digital Display
Attach the monitor or monitors to the rear of the recorder using the cable supplied by the monitor manufacturer. Refer
to the monitor manual for detailed information on how to setup and use it.
Note
The monitor must be capable a minimum screen resolution of 1024 x 768 and support 32 Bit
color.
POWER SETUP
WARNING:
To reduce the risk of electrical shock or damage to the equipment:
Do not disable the power grounding plug.
The grounding plug is an important safety feature.
If the electrical plug you are using does not have a ground plug receptacle
contact a licensed electrician to have it replaced with a grounded electrical
outlet.
Plug the power cord into a grounded (earthed) electrical outlet that is easily
accessible at all times.
Disconnect the power from the computer by unplugging the power cord either
from the electrical outlet or the computer.
32520AB 19