Onwa Marine Electronics KR-12X8 - Manual (Page 30)

2.19 Shifting (off centering) the Picture
Your vessel's position can be shifted up to 75% (not available on 48nm range)
of the range in use to view the situation around your vessel without changing
the range or size of targets.
Place cursor Where desired Press [OFF CENTER] key to off center
display
Figure 2-12 Shifting the picture
1. Press the omnipad to set cursor where desired.
2. Press the [MENU] key ,select "SHIFT" and press [ACQ ENTER] key;
3. Press [ ] or [ ] key select "ON" and press [ACQ/ENTER] key.
OFF-CENT" appears at the top right corner of the display when the picture
is shifted.
Cancelling shifted picture
"
Repeat the above steps and select "OFF"
2.20 Zoom
The zoom feature allows you to double the size of the area between your vessel
and any location within the current range to take a closer look at an area of interest.
1. Select location with the cursor.
2. Select ZOOM on the menu, ZOOM appears at the top right corner when the
ZOOM function is on .
Cursor
Cursor
23