Onwa Marine Electronics KP-823MKII - Manual (Page 24)

22
4. THE AIS FUNTION 4.THE AIS FUNTION
4.1 Start AIS function
Enter the "Main Menu", select the "In/Out" column, at the " " column
select "Connect AIS ", and then move the cursor to the "OK", press the
ENT key to connect AIS equipment. See Figure 34
4.2 Vessels list
Enter the "Main Menu", and select the "AIS" to check all the AIS vessels received
by the current AIS equipment. See Figure 35
Data In/Out
Device
4.3 The collision alarm
Enter the "Main Menu", and select the "Alarm", and then select the scope of the
collision alarm according to the time and distance. See Figure 36
an optional feature comes with the collision alarm as following: the
live audio broadcast and also the capability to broadcast the distance, it has to
be indicated in the purchasing order for this optional function if needed.
There are
Figure 34 Figure 35
Figure 36