OnLine Power Mini Power Wave - Manual (Page 19)

6005-100 Rev A 10
6.3 Control Panel functions
Operation of the UPS is indicated on the monitor panel with five LED indicators and an LCD screen. This
display is also capable of alerting the user with audible alarms.
ON This green LED is lit when UPS has been turned on.
OUTPUT AVAIL When the UPS is in normal or static bypass modes, there is voltage at the output
terminals and this LED will light up in green.
BATT MODE While operating in battery mode.
BYPASS MODE While operating in bypass mode, this LED will light up in yellow.
FAULT If any internal error occurs in the UPS, this LED will light up in red and give off an audible
alarm. Press any of the buttons on the front panel to turn off the alarm.