Olson Technology MUSCLE-300C - Manual (Page 4)

Figure 1 - OTOT-300C Key Dimensions
Figure 2 - Senko SmartCleaner
OPTICAL CONNECTORS AND CLEANING
The standard optical connector is an SC/APC. In order to use an FC/APC
connectors, you must order a conversion kit, OTLL-SCFCKIT. The standard
optical connector location is on the same side as the RF connector. The fiber ends
can be damaged by the insertion of contaminated connectors. Some types of
customer damage to connectors are not covered under warranty. Fiber
connectors should never be left uncovered. Pre-packaged alcohol wipes are a
convenient means of cleaning optical connectors. Clean alcohol and lint free
wipes, such as Kim-Wipe type 34155, or swabs may also be used.
More sophisticated fiber optic connector cleaners, such as the Senko
SmartCleaner (SCK-SC-250) are very effective for cleaning external and internal
fiber optic connectors.