Olson Technology MUSCLE-300C - Manual (Page 2)

SAFETY WARNINGS
LASER RADIATION
A laser transmitter emits invisible radiation that can cause permanent eye
damage.
. Operate the transmitter only
with the proper optical fiber installed in the transmitter optical connector. Power to
the OTOT-300C should be turned-off or preferably, disconnected whenever the
optical connector cover is opened and there is no installed fiber (as when the fiber
connector is being installed or removed from the transmitter connector).
AVOID DIRECT EXPOSURE TO BEAM
NEVER
NEVER
NEVER
NEVER
USE ANY OPTICAL INSTRUMENT TO VIEW THE OUTPUT OF THE
LASER TRANSMITTER. “OPTICAL INSTRUMENT” INCLUDES MAGNIFYING
GLASSES, ETC.
LOOK INTO THE OUTPUT OF THE LASER TRANSMITTER
LOOK INTO THE OUTPUT OF A FIBER CONNECTED TO A LASER
TRANSMITTER.
LOOK INTO OR USE ANY OPTICAL INSTRUMENT TO VIEW THE
DISTANT END OF A FIBER THAT MAY BE CONNECTED DIRECTLY OR VIA AN
OPTICAL SPLITTER, TO A TRANSMITTER THAT MAY BE OPERATING. THIS
SPECIFICALLY APPLIES TO FIBERS THAT ARE TO BE CONNECTED TO
RECEIVERS OR OTHER DEVICES AT ANY DISTANCE FROM THE LASER
TRANSMITTER.
SHOCK HAZARD
The OTOT-300C is designed for indoor use only. Direct exposure to moisture must
be avoided. Connect the AC Adapter into the OTOT-300C before plugging the
adapter into the wall.