Olson Technology OTOHP-CH - Manual (Page 2)

Failure to comply with these general safety precautions and with the specific
precautions described elsewhere in this manual violates the safety standards of the
design, manufacture, and intended use of the device. Olson Technology Inc. assumes
no liability for the customer’s failure to comply with these precautions.
CAUTION: Ensure that the voltage visible through the Line Voltage Indicator window on
the AC power entry port of the power supply module corresponds to the range in the
specifications (85 to 264 V ).
AC
CAUTION: Do not operate the chassis or power supply outside of their maximum
ratings. Doing so may result in unsatisfactory performance, unit failure, shortened unit
life span, or a safety hazard.
CAUTION: Do not attempt to modify or service any part of this chassis not specifically
referred to as replaceable in this manual. Doing so voids the warranty. Return the
chassis to Olson Technology Inc. for service and repair.
CAUTION: No chassis should be operated in an ambient environment above 50ºC
(122ºF).
CAUTION: Store the chassis and power supply module away from corrosive materials,
at a temperature between -40 and +70ºC (-40 to +158ºF), and with no more than 85%
humidity, non-condensing.
CAUTION: Do not restrict airflow in front or back of the chassis. The OTOHP-PS power
supply module should be operated in an ambient environment between 0 and 50ºC (32
and 122ºF) for a continuous output of 200 watts.
PRECAUTIONS