Olson Technology OTEB-CL-B - Manual (Page 6)

025-000634X1 Page 4 of 11
Menu #15 - TEC2 Displays the TEC current of PUMP2
Menu #16 - TEC3 Displays the TEC current of PUMP3
Menu #17 - TEC4 Displays the TEC current of PUMP4
Menu #18 - TEC5 Displays the TEC current of PUMP5
Menu #19 - TEC6 Displays the TEC current of PUMP6
Menu #20 - TEC7 Displays the TEC of PUMP7
Menu #21 - TEC8 Displays the TEC current of PUMP8
Menu #22 - TEC9 Displays the TEC current of PUMP9
Menu #23 - TEMP1 Displays the laser temperature of PUMP1
Menu #24 - TEMP2 Displays the laser temperature of PUMP2
Menu #25 - TEMP3 Displays the laser temperature of PUMP3
Menu #26 - TEMP4 Displays the laser temperature of PUMP4
Menu #27 - TEMP5 Displays the laser temperature of PUMP5
Menu #28 - TEMP6 Displays the laser temperature of PUMP6
Menu #29 - TEMP7 Displays the laser temperature of PUMP7
Menu #30 - TEMP8 Displays the laser temperature of PUMP8
Menu #31 - TEMP9 Displays the laser temperature of PUMP9
Menu #32 - +5V Monitor Displays the voltage
Menu #33 - -5V Monitor Displays the voltage
Menu #34 - UNIT TEMP Displays the unit's case temperature
Menu #35 - IP Displays the IP address (Adjustable)
Menu #36 - SUBNET Display the address of net mask (Adjustable)
Menu #37 - GATEWAY Displays the gateway address (Adjustable)
Menu #38 - TRAP ADDR1 Displays the TRAP1 address (Adjustable)
Menu #39 - TRAP ADDR2 Displays the TRAP2 address (Adjustable)
2.1.1 Changing Parameters
Press the ▼ key to select the address menu to be updated. Press the  key to choose the
change place. Push the  key to increment the value by one. Press the ▼ key to the exit the
address and save it.
For example, update the IP setup menu, IP: 192.168.000.015; to change 5 to 6, use the
 key
to choose the number 5, then press the  key to change 5 to 6. Finally, press the ▼ key to
save updated IP: 192.168.000.016