Olson Technology OTEB-CL-B - Manual (Page 5)

025-000634X1 Page 3 of 11
3.0 EDFA CONTROLS, INDICATORS, AND ALARMS
This section of the manual will give an overview of the available menus in the OTEB-CL-B series
EDFA and their descriptions. The user can scroll through the EDFA menus by using the push
buttons that are on the front panel and are located beside the LCD screen.
OTEB-CL-B (1RU Style)
3.1 The Operation of the Panel
3.1.1 Starting Menu
A. Plug in the power supply and connect all fibers.
B. Turn on power switch in the back panel, Front panel display “KEY OFF”
Laser Status LED Red
Alarm Status LED Green
Link Status LED Off / Green
C. Apply optical input power, then press laser start-up key switch. Front panel
shows “KEY ON”，Laser status lamp turns green from red.
3.1.2 Start-up Main Menu
Press ▲/▼ button and the following menu will be displayed in sequence.
Menu #1 - Model Displays the model of this equipment
Menu #2 - S/N Displays the serial number of this equipment
Menu #3 - INPUT Displays the input optical power in dBm.
Menu #4 - OUTPUT Displays the output optical power in dBm.
Menu #5 - BIAS1 Displays the current of PUMP1
Menu #6 - BIAS2 Displays the current of PUMP2
Menu #7 - BIAS3 Displays the current of PUMP3
Menu #8 - BIAS4 Displays the current of PUMP4
Menu #9 - BIAS5 Displays the current of PUMP5
Menu #10 - BIAS6 Displays the current of PUMP6
Menu #11 - BIAS7 Displays the current of PUMP7
Menu #12 - BIAS8 Displays the current of PUMP8
Menu #13 - BIAS9 Displays the current of PUMP9
Menu #14 - TEC1 Displays the TEC current of PUMP1