Northern Airborne Technology RS08 - Manual (Page 10)

RS08 Remote Switch Manual SM15 Rev.4.00
Page 1-2 Nov 24, 2003
ENG-FORM: 800-0106.DOT
CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.
1.4 Specifications
1.4.1 Electrical Specifications
Input Power +9 to 33 Vdc at 100 mA Max. (Excluding lamps).
Case is internally grounded.
Lamps Type 327/387 for 28 V (40 mA).
Type 330/382 for 14 V (80 mA).
Maximum lamp load is 100 mA if internal dimming
function
is used.
Logic Ground seeking input for switch transfer.
Ground seeking ILS Enable input to return indicator to
ILS mode. Will accept positive bias on this line from
5-12 V, and an external diode or transistor junction in
series with the ground return.
Indicator Dry circuit switching to accommodate standard HSI
levels (500
µA), or up to 2 A @ 28 Vdc.
Flag bias 1.0 mA, if required.
Loads External 1 K Ω, if required.
Annunciators Lamp circuitry provided for mode annunciation.
Optional remote switch selectable dimming for 14/28V.
1.4.2 Physical Specifications
Height 1.25 inches (31.75 mm)
Depth 2.30 inches (58.42 mm) (excluding connector)
Width 4.50 inches (114.30 mm)
Mounting Bulkhead attachment (4 x 1032/AN3)
Weight 6 oz. (168 g) (excluding mating connector)