Northern Airborne Technology PB08 - Manual (Page 9)

SM15 Rev. 4.00 PB08 Illuminated Pushbutton Switch Manual
Nov 24, 2003 Page 2-1
ENG-FORM: 805-0101.DOT
Section 2.0 Installation
2.1 General
Information in this section consists of: unpacking and inspection procedures, installation
procedures, post-installation checks and installation drawings.
2.2 Unpacking and Inspection
Unpack the equipment carefully and locate the warranty card. Inspect the unit visually
for damage due to shipping and report all such claims immediately to the carrier
involved. Note that each unit should have the following:
- PB08 Switch
- Legend Sheet
- Installation Manual
Verify that all items are present before proceeding and report any shortage immediately
to your supplier.
2.3 Installation Procedures
2.3.1 Warnings
These switches are very high quality, gold-contact units meant for logic switching. Do
not attempt to switch high-current loads (>200mA) with these contacts or permanent
damage will result.
2.3.2 Cautions
The lens assembly fits in the housing with either color to the right, so be sure to follow
the drawings in section 2.4 to ensure correct wiring.
2.3.3 Notes
Other lens combinations are available from NAT, or they can be interchanged with
legends from the LL08.