Northern Airborne Technology PB08 - Manual (Page 7)

SM15 Rev. 4.00 PB08 Illuminated Pushbutton Switch Manual
Nov 24, 2003 Page 1-1
ENG-FORM: 800-0101.DOT
Section 1.0 Description
1.1 Introduction
Information in this section consists of: purpose of equipment, features, specifications,
and a listing of all models available to the date of publication.
1.2 Purpose of Equipment
The PB08 is a positive action 2-pole switch with two individual legend lamps. The PB08
switch is designed for use with the RS08/RS12 series of remote switches from NAT.
1.3 Features
Units are shipped assembled (but with no legends inserted), and with lamps (28 V)
installed. The desired legends must be cut from the sheet provided and inserted inside
the lens cap. If 14 V operation is required, substitute type 386 lamps.
The combination of a two pole switch with two individual legend lamps is very effective
for GPS, LORAN or other NAV AID transfer switching and annunciation.
1.4 Specifications
1.4.1 Electrical Specifications
Lamp Power +14/+28 VDC at 200 mA max.
Lamps Type 388 for 28 V operation
Type 386 for 14 V operation
1.4.2 Physical Specifications
Height
17.9 mm (0.71 inches)
Length 48.5
mm (1.91 inches)
Width
23.8 mm (0.94 inches)
Mounting Front mounting, held in place by compression
fingers