Taillight, tail/stop light, rear marker light, Coupe models) – Dodge 2009 Viper User Manual

Page 243

3. Turn the appropriate bulb and socket assembly coun-
terclockwise, and then pull it out of the upper light
assembly.

4. Pull the bulb out of the socket assembly.

5. Push the replacement bulb into the socket assembly.

6. Reinstall the bulb and socket assembly into the upper
light assembly, and then turn it clockwise.

7. Install the access panel and the two fasteners.

8. Close the trunk.

Taillight, Tail/Stop Light, Rear Marker Light
(Coupe Models)

For bulb replacement, see your authorized dealer.

1 — Rear Marker Light
2 — Tail/Stop Light
3 — Taillight

MAINTAINING YOUR VEHICLE

241