Installation – Norsat O3b 20W BUC User Manual

Page 11

4. INSTALLATION

This section of the manual is intended to provide aid in BUC installation.

4.1

UNPACKING

Perform an initial inspection upon receiving the BUC. You are advised to ensure the following:

 Check that the shipping container is not opened or damaged.

Have a representative from the shipping company present if you suspect that the shipment

is damaged or tempered with before opening the container.

 Check that all items in the packing list are present and undamaged.

 If any loss or damage is discovered, contact NORSAT Inc. or a local representative before

proceeding.

 The shipping container and packing materials should be retained for possible reshipment.

Accessories for 7020STC-O3b A or B are four waveguide adapter fixing screws, and an O-ring for

the waveguide adapter.

4.2

INSTALLATION ON ANTENNA

7020STC-O3b have two M4 threaded holes at each side of BUC as shown in Fig. 6 and these

holes are used to fix the mounting bracket when used as stand-alone unit.

Please fix proper

brackets to four fixing holes on the BUC before mounting the BUC to the antenna.

One of these

fixing holes can be used

to connect the BUC housing to the earth for grounding.

Figure 6. Location of fixing holes on Ka 20W BUC

Page 11 of 25