Norsat O3b 10W BUC - Manual (Page 19)

© 2013 Norsat International Inc. Page 19 of 26
Figure 12. BUC GUI window for operation
Select a usable COM port and the baud rate of 57,600 and click the open button. If the COM port is
open, BUC GUI will show a serial number (SERIAL NO), and the LED color for SERIAL changes
from red into green and Enable is marked as shown in Figure 13. BUC GUI starts reading status
information of the BUC periodically. And you can send control commands you want to the BUC by
clicking proper tabs such as MAX GAIN or SSPA ON or entering serial commands into the serial
command text box shown in Fig. 13.
Figure 13. BUC GUI window for RS 232 operation