Niveo Professional NPD8C16A - Manual (Page 14)

MS-PDU User Manual V/0
14
Switch22 1.3.6.1.4.1.30966.10.2.4.22 On/off state of outlet No.22 Read/Write
Switch23 1.3.6.1.4.1.30966.10.2.4.23 On/off state of outlet No.23 Read/Write
Switch24 1.3.6.1.4.1.30966.10.2.4.24 On/off state of outlet No.24 Read/Write
6.2.3 Serial access
Baud rate is 9600.
There are 5 commands: OUTPUT, INPUT, SWITCH, RESET and REBOOT.
OUTPUT command：OUTPUT X
For example: send command OUTPUT 1, get output 1 current: X A.
INPUT command: INPUT X (1 is voltage, 2 is current)
For example: send command INPUT 1, get total voltage: X V
send command INPUT 2, get total current: X A
SWITCH command: SWITCH X
For example: send command SWITCH 1, get the on/off state of output 1.
RESET command: to reset to factory default configuration.
REBOOT command: to reset the PDU
7. Technical parameters
No Item Parameters
1 Input
Rated input voltage 110/220V~ 0/60 Hz
Input plug Standard: IEC60309 plug
Cable 16A：3×2.5mm², 32A：3×6.0mm²
Max. load 16A, 32A
Overload protection Master circuit breaker 1P
2 Output
Rated output voltage 110/220VAC
Max. load 16A, 32A
Outlet types
Standard: IEC320 C13
Other sockets optional
Outlet numbers Optional
3 Ports
NET port 1 x RJ45
Serial port 1 x RJ45