NIStune Type 2 V.1.6 - Manual (Page 17)

Type 2 Hardware Installation Manual Page 17 of 20
6. Q45 VH45DE Infiniti Installation
Please Refer to the Z32 300ZX Installation
Figure illustrates installation of installed 28 pin socket
Desolder the four pads next to the EPROM socket where marked with R/W
Where you have desoldered the four pads, solder in the supplied connector cable. The plastic
connector has a number '1' on it. This corresponds to pin R/W of the connector. Make sure that you
solder in the cable in the correct direction