NIStune Type 2 V.1.6 User Manual
Page 10
Type 2 Hardware Installation Manual
Page 10 of 20
Folding knock sensor boards components
NOTE: Fold over any potentially touching components. Ensure clearance with the Nistune
board
Push all the components on the knock sensor board out of the way so they do not have contact with
the Nistune board. In particular there is one capacitor which should be shifted out of the way. It may
be necessary to heat the legs and extend the capacitor from the board in order to fold it out of the
way so it does not contact the Nistune board