5 front view – Nevion SD3232M User Manual
Page 8
Modular 3G SD Video Rev. E
nevion.com | 8
Signal polarity:
Non-inverting with respect to inputs.
Signal transition (both video formats):
Jitter:
-
< 0.2 UI (HD-SDI and SD-SDI);
-
< 0.3 UI (3G-SDI).
Reference inputs:
Number of inputs:
2 standard; both reference signals supplied to both system
controllers when used in redundant mode.
Connector:
75 ohm BNC female, loop-thru.
Return loss:
>40dB (100kHz
– 5MHz)
>35dB (5-10MHz).
Signal format:
NTSC or PAL Black&Burst or HD Tri-Level according to
SMPTE 274M, SMPTE 276M.
Signal level:
Nominal 1.0Vp-p.
Field selectivity:
Odd/Even field selectable.
Timing adj. range:
-
0-20 lines in 1 line steps.
-
Vertical Interval Switching Point: Manual
configuration with options fully in accordance with
SMPTE RP168.
2.5 Front view
4
Not in use Multicon VX-MOD
5
Power Supplies X-point Modules4
(Two most
left positions)
4
The picture shows a 9RU frame. The 5RU misses the upper two connector boards.
5
Controller modules are not shown in the picture, but are applicable in the two rightmost slots.