4 connection details, 1 power supply pin-out – Nevion Sublime Control Panels User Manual
Page 7
VikinX Sublime Control Panels
Rev. M
nevion.com | 7
2.4 Connection details
The Sublime routers and control panels have the following service connections on the rear
of each product:
Figure 1: Sublime service connectors.
SYNC:
Not in use on Control Panels.
LOOP:
Not in use on Control Panels.
NCB IN:
Network Control Bus Input. The protocol of this bus is described in a
separate manual.
NCB OUT:
Network Control Bus Output.
ETHERNET:
10/100Base-T Ethernet bus for external router control.
RS 232:
RS-232 for external control protocols.
POWER A:
±15VDC power connector.
POWER B:
±15VDC power connector, redundant supply.
CONFIGURATION:
Configurations switch. See Chapter 3 for further descriptions.
2.4.1 Power Supply pin-out
The DE9 male sockets for the power connection on Sublime routers and Control Panels
have the following pin-out;
Pin #
Description
1
GND
2
Not connected
3
Not connected
4
+15VDC
5
Not connected
6
Not connected
7
Not connected
8
-15VDC
9
Not connected