Nevion SL-3GHD128128-RC - Manual (Page 16)

SL-3GHD128128-RC Rev. A
nevion.com | 16
the control option, and disables the RS-232 port of that device.

Leitch Pass-Through (RS-232)
This option allows support for Leitch Pass-Through protocol via RS-232 interface. The
details of this protocol are described in Leitch Routing Switchers Serial Protocol
Reference, Edition E. See also Appendix B.1 for details.
This option is not supported over NCB.

Leitch Pass-Through (TCP/IP)
This option allows support for Leitch Pass-Through protocol via TCP/IP interface. The
details of this protocol are described in Leitch Routing Switchers Serial Protocol
Reference, Edition E.
The interface is using port 23 for this protocol option; same port as for Telnet
applications. See also Appendix B.1 for details.
The Leitch Pass-Through selections are only available on Sublime routers with
FW version 2.4.x and higher.

Grass Valley Native protocol (TCP/IP)
This option allows support for Grass Valley Native protocol via TCP/IP interface, using
port 12345. The subset of this protocol that is supported by Sublime routers is
described in Appendix B.2.
The Grass Valley Native protocol is only available on Sublime routers with FW
version 2.5.4 and higher.
Use your Nevion Configurator to verify the HW revision of your Sublime unit:
Right-click the column headers and select the appropriate column to be shown,
if you don’t see the appropriate column in your default display.
For further information about FW releases, please go to the Nevion web site to download,
or check available FW releases:
www.nevion.com .
3.8 Configuring Input options
This configuration is done in the Nevion Configurator.
3.8.1 Input EQ
It is possible to enable, or bypass, Input EQ for each router input separately. Default is
Input EQ enabled.
MRP is always enabled when any TCP/IP based protocol is selected. This makes
it possible to use Sublime panels when a third party protocol is selected.