5 connections, 1 mounting the connector module, 2 terminal format support – Nevion 3GHD-OE User Manual

Page 13

3GHD-OE / 3GHD-OE-2

Rev. F

nevion.com | 13

5 Connections

The 3GHD-OE and 3GHD-OE-2 has a dedicated connector module; 3GHD-EO-2-C1. This
module is mounted at the rear of the sub-rack. The module is shown in the figure below.

Figure 11 Connector module for 3GHD-OE-2

5.1 Mounting the connector module

The details of how the connector module is mounted, is found in the user manual for the sub-
rack frame FR-2RU-10-2.

This manual is also available from our web site:

http://www.nevion.com/

5.2 Terminal format support

The different input and output ports on 3GHD-OE and 3GHD-OE-2 can support a number of
formats. The table below show which signal formats are supported on the selected terminals.

Terminal format support for single converter:

Terminal

Function

Supported Format

Mode

OPT1

Optical input

SDI, DVB-ASI,

SMPTE310, Transparent

Input

OPT2

Not used.

I/O1

I/O2

Electrical Output

Reclocked DA output

SDI, DVB-ASI, Transparent

Output

––

Electrical Output

Reclocked DA inverted
output

SDI, Transparent

Output

GPI ALARM

Open Collector Alarms Wired alarms

OC Output

This manual is related to the following products:

3GHD-OE-2