5 connections, 1 mounting the connector module, 2 terminal ports – Nevion DVI-SDI-2-SFP User Manual
Page 8: 5connections

DVI-SDI-2-SFP
Rev. C
nevion.com | 8
5
Connections
Figure 4 Connector module for DVI-SDI-2
5.1 Mounting the connector module
The details of how the connector module is mounted, is found in the user manual for the sub-
rack frame FR-2RU-10-2.
This manual is also available from our web site:
5.2 Terminal ports
The connector module must be fitted with three SFP’s. SFP3 is for the dual optical receiver
module. While the SFP1 and SFP2 are for the HDMI/DVI SFP. The HDMI/DVI SFP are fitted
with an HDMI type D connector, if other connect are preferred see chapter Error! Reference
ource not found. for alternatives.
Terminal
Function
Supported Format
Mode
SFP3
Optical output
Optical SD/HD/3G-SDI
Output
SFP1
Electrical input
HDMI or DVI
Input
SFP2
Electrical input
HDMI or DVI
Input
GPI ALARM
Open Collector Alarms Wired alarms
OC Output
Unused inputs should be terminated to avoid alarms triggered by noise.