2 specifications, 1 general, 1 electrical inputs – Nevion DVI-SDI-2-SFP User Manual
Page 5: 2 optical output, 3 standards, 2specifications

DVI-SDI-2-SFP
Rev. C
nevion.com | 5
2
Specifications
2.1 General
Power
+5V DC / 5W, max
Control
Control system for access to setup and module status
with BITE (Built-In Test Equipment)
Temperature range
0 to +40 °C
2.1 Electrical Inputs
Number of inputs
2
Connector
HDMI type D
HDMI type A with use of adapter cable
DVI-D with use of adapter cable
Supported format
525i/ 625i
720p/ 1080i, 50/59.94/60Hz
1080p, 50/ 59.94/ 60Hz
640x480: converted to 720p by adding black lines
800x600: converted to 720p by adding black lines.
1024x768: converted to 1080p by adding black lines.
1280x1024: converted to 1080p by adding black lines.
Other graphical format may work.
Number of bits
24bit (3x8bit)
Bandwidth
165MHz
Format
RGB 4:4:4, YCbCr 4:2:2, YCbCr 4:4:4
Only non-HDCP protected signal
RGB Range
Full or SMPTE
Audio embedding
2 channels, AES 1 group. L-PCM, 48kHz
2.2 Optical output
Number of outputs
2
Connector
LC/UPC
SFP type
Nevion Video SFP range, Dual transmitter
See SFP datasheet for additional specifications
2.3 Standards
SMPTE292M, SMPTE259M, SMPTE297M, SMPTE425A, SMPTE425B, SMPTE424M