Nevion DAC-AVA-DMUX - Manual (Page 6)

DAC-AVA-DMUX Rev. A
nevion.com | 6
The following table summarizes the ordering options available (for prices, please contact
Nevion or an authorized Nevion dealer):

Nevion option code
Hardware
(select one)
DAC-AVA-DMUX+
DAC-AVA-DMUX-R+
+
Input formats
(select at least one)
DAC OPT input HD
DAC OPT input SD
+
AES/analog
audio outputs
DAC OPT audio
Table 1: Available options
At the bottom of the information page (the ‘front page’) of the module in Multicon GYDA a
line will show which features are enabled:
This example shows a module with all optional features present.
1.2.1 How to apply a software key that enables new options
1) In Multicon Gyda, navigate to the DAC-AVA-DMUX module in question by first
pressing the frame symbol and then pressing the icon for the DAC-AVA-DMUX. In
the example picture below, two such modules are present in the same frame, and
the one in slot 1 has been selected.
Figure 2: A frame with two DAC-AVA-DMUX modules
2) Check which features are already enabled in the module. At the bottom of the
information page that is now shown will be a line that says “Purchased features”,
which lists the enabled input formats, whether the SDI outputs are enabled, and
finally whether the AES/analog audio outputs are enabled or not. In the examples
shown here, all optional features are already enabled and no further upgrades are
available.
Figure 3: How to see purchased features, new Multicon Gyda
Older versions of Multicon Gyda cannot display the line “Purchased features”
properly , the words “SD:”, “HD:”, “SDI:” and “Audio:” will be missing.