Nevion HDSDI-CHO-2x1 - Manual (Page 8)

HDSDI-CHO-2x1 Rev. G
nevion.com | 8
4 Connections
The HDSDI-CHO-2x1 and HDSDI-CHO-2x1-PB has dedicated connector modules, SDI-
CHO-2x1-C1 and FRS-HD-CHO-C1. These modules are mounted at the rear of the sub-
rack. The modules are shown in the figure below.
Figure 6: SDI-CHO-2X1-C1 FRS-HD-CHO C1
The electrical input signals are connected to the IN1 and IN2 BNC’s. The electrical outputs
are connected to the O1 to O4 BNC’s. Please note that only 2 outputs are non-inverted and
suitable for DVB-ASI. The Sync input connectors are not in use on this product.
The details of how the connector module is mounted, is found in the user manual
for the sub-rack frame FR-2RU-10-2-xx.
This manual is also available from our web site: http://www.nevion.com/