2 specifications, 1 electrical input, 2 electrical output – Nevion HDSDI-CHO-2x1 User Manual
Page 5: 3 features, 4 electrical, 5 supported standards
HDSDI-CHO-2x1
Rev. G
nevion.com | 5
2 Specifications
2.1 Electrical input
Number of inputs:
2.
Data rate NRZ:
1
– 1485 Mbps.
Equalization:
Automatic;
Cable reclocker can be bypassed to support bit rates down to
1Mbps.
Impedance:
75 ohm
Return loss:
≤15dB @ 1485MHz.
Signal level:
nom. 800mV;
Approximately 200mV min. when equalizer switched to Bypass.
Connector:
BNC.
2.2 Electrical output
Number of outputs:
4.
Connector:
BNC.
Impedance:
75 ohm.
Return loss:
≤15dB @ 1485MHz.
Jitter:
< 0.2UI.
Peak to peak signal level:
0.8V +/- 0.1V.
Signal polarity
2 outputs non-inverting, 2 outputs inverting.
2.3 Features
Re-clocking:
Automatic clock rate detection;
Supported clock rates: 143, 177, 270, 360, 540 and 1485 Mbps.
2.4 Electrical
Power:
+5V DC / 3W Max.
Control:
Control system for access to setup and module status with BITE
(Built-In Test Equipment) for use with GYDA Control System.
2.5 Supported standards
SMPTE:
SMPTE292M, SMPTE259M, SMPTE305.2M, SMPTE310M,
SMPTE344M
DVB-ASI:
EN50083-9