Nevion ARC-SD-XMUX4 User Manual

Page 21

ARC-SD-XMUX4

Rev. B

nevion.com | 21

ADLY

Audio follows
video delay

On: De-embedded audio
follows video. DIP 17-18 is
used
Off: De-embedded audio will
not use Frame delay from dip
17-18

If on, de-embedded audio
delay will follow video delay

OPT/EL

Optical / Electrical input

SDO1PR
OC

SDI OUT 1

Off: through mode
On: processed mode

In through mode the video
only goes through a re-
clocker.

SDO2PR
OC

SDI OUT 2

Off: through mode
On: processed mode

In through mode the video
only goes through a re-
clocker.

F-RESET

Off: Use values preset by
MULTICON GYDA.
On: RESET to factory defaults

This DIP is only read at
power up. After repowering
with the DIP off, the board
must be kept in the frame
for minimum 10s to fully
reset.
Values preset by
MULTICON GYDA, are only
values not set by DIPs,
push buttons or rotary
switches.

OVR

Off: MULTICON GYDA mode
On: Manual mode

This DIP is only read at
power up.
OVR is short term for
MULTICON GYDA override

Table 1: DIP SWITCH FUNCTIONS