Nevion DWC-HD-DMUX - Manual (Page 18)

DWC-HD-DMUX Rev. F
nevion.com | 18
4
Configuration
4.1 DIP switch functions
The two sets of DIP switches are labeled with a number running from 1 to 15. The 16 th DIP
is labeled OVR. Note that the left DIP switch of the horizontal DIP package is number 1.
The top DIP switch of the vertical DIP package is number 9. Default settings as delivered
from factory should be all DIPs in the Off position. The module will then be under Gyda
control, see description for DIP switch 16 below.
Table 1: DIP SWITCH FUNCTIONS
Switch # Function name Function DIPs Comment
1 SDI OUT 1
+
Video DAC out Off: processed mode
On: through mode In through mode the
video goes through a
re-clocker only, and
the video DAC
output will also be
HD (always YPbPr).
2 SDI OUT 2 Off: processed mode
On: through mode In through mode the
video goes through a
re-clocker only.
3 - 4 Aspect ratio DIP[3 4] = [Off Off] => 16:9
DIP[3 4] = [Off On] => 4:3
DIP[3 4] = [On Off] => 16:9 LB
DIP[3 4] = [On On] => Previous
setting preserved These 2 DIPs
choose aspect ratio
for down-converted
video.
“Previous setting
preserved”: With
DIPs in this position
before the module is
booted into manual
mode; the module
will keep the
previous value set by
Gyda.
5 - 6 SD video DAC
format DIP[5 6] = [Off Off] => CVBS
DIP[5 6] = [Off On] => YPbPr
DIP[5 6] = [On Off] => SVideo
DIP[5 6] = [On On] => RGB These two DIPs
choose video DAC
output format for SD
output. Analog HD is
always YPbPr.
7 SD video DAC
modulation Off: PAL B/G + NTSC
On: PAL N + PAL M Selection between
PAL B/G and NTSC
or PAL M and PAL N
is automatic, based
on video input.
8 Black setup
disable Off: Black setup for NTSC
On: No black setup For NTSC only.
9 Input priority Off: Optical input has priority
On: Electrical input has priority This switch has no
effect for boards
without the optical
input (-R option).
10 - 11 Audio DAC and
AES group DIP[10 11] = [Off Off] => Gr1
DIP[10 11] = [Off On] => Gr2
DIP[10 11] = [On Off] => Gr3
DIP[10 11] = [On On] => Gr4 The 2 first of these 4
DIPS select one of
the de-embedded
groups. The next two