NavCom Rinex Utility Rev.D - Manual (Page 12)

RINEX Utility – Rev D
11
 If no conversion options are desired, click the Start button to generate the RINEX files.
User Input
Figure 4: User Input Area
Completing the User Input fields is optional. Entries in these fields are included in the headers of
the RINEX navigation or observation files.
Figure 4 shows the User Input area of the RINEX Utility.
 Use Input File Name as the Marker Position In the Output File: Clicking the checkbox allows
the input file name to be used as the Marker name.
 Marker name: Allows up to 60 characters to identify the site where the data was collected.
 Leap seconds: Allows the user to insert the current GPS Leap Second value, if known. If left
blank no leap second value will be reported in the RINEX ephemeris (navigation) file
header, or the RINEX Utility will use the leap second time reported in the raw data file (if one
exists). If the raw data file has a larger leap second value reported than the user entered
value, the raw data file value will be used instead.
 Antenna height above marker: Allows the user to insert antenna base height above the
survey point. This adjustment can often be made in the Post Processing Software package
as well.
Options
Figure 5: Options Area
Completing the Options fields is optional. To modify an option, click the checkbox above and/or
to the left of the optional field.
Figure 5 shows the Options area of the RINEX Utility.