Museum Technology Source BB-200 Motion Sensor - Manual (Page 2)

SENSITIVITY ADJUSTMENT
Using a small screwiver carefully change the
potentiometer to achieve the desired range.
Rotate CLOCKWISE to increase range
Least
Sensitive Most
Sensitive
Operating Range:
Sensor mounted 7 feet above floor, Microwave Module aimed down 30 degrees
Minimum Field Size:
20 by 10 inches
Maximum Field Size: 13 by 6 feet
Microwave Module Adjustment:
Vertical: -5 degress to 90 degrees in 5 degree increments
Rotational: -20 degrees to +20 degrees
Power Requirements:
AC 12 to 28 Volts
DC 11.5 to 32 Volts
Power Consumption: 120 mA maximum
Output Relay Rating: Maximum Voltage 48, Maximum Current 1 Ampere
Indicator: Green LED illuminates when motion detected
Operating Temperature: -4 to 140 degrees F (-20 to 60 degrees C)
Size: L x W x D 6.8” x 2.4” x 1.9” (172 x 60 x 48 mm)
Weight 4.2 Ounces (120 Grams)
Museum Technology Source Inc.
323 Andover Street | Wilmington MA 01887
800-729-6873 | 978-657-3898 | f 978-657-7132
www.museumtech.com Initial Release November 2011 REV A
When mounted 7 feet above the floor, with the Microwave Module aimed down 30
degrees the detection field will be approximately 20 inches wide and 10 inches deep a
mimimum sensitivity. As maximum sensitivity, the detection field will be approximately
13 feet wide extending outward about 6 feet 6 inches. These are typical ranges, but the
actual setting should be determined during installation.