Museum Technology Source DVD-204-BR Control for Pioneer BluRay - Manual (Page 4)

Please choose a command: B
Which button's selection do you want to
view or edit? 2
Button 2 plays from TIME 2000 to TIME
2100.
Do you want to change this (Y/N)? Yes
Enter start TIME and press RETURN: 200
Enter end TIME and press RETURN: 230
** Programming: done **
Button 2 plays from TIME 200 to TIME
230.
To change a button’s settings, Press B, then the
number of the button to be edited, in this example
button 2.
Current settings are shown here.
To change, press Y
Enter new START TIME in Minutes and Seconds.
Do not use any punctuation. Example: for 2 min-
utes 0 seconds, enter 200
Enter new STOP TIME, in this case 2 min 30 sec
entered as 230.
Programming CHAPTER numbers follow the same
technique.
Please choose a command: I
When idle, the player plays from TIME
13000
to TIME 13100.
Do you want to change this (Y/N)? Yes
When no selection is running,
the player can play moving video,
freeze on a single TIME,
or output a blank screeen.
Do you want the player to
play moving video (Y/N)? Yes
Enter the start TIME for the idle selec-
tion
and press RETURN: 100
Enter the end TIME for the idle selection
and press RETURN: 525
** Programming: done **
When idle, the player plays from TIME
100
to TIME 525.
------- Main Menu -------
To change the IDLE (ATTRACT) setting press I
Current settings displayed
Select desired option:
MOVING VIDEO
STILL FRAME
BLANK SCREEN
In this example, MOVING VIDEO was selected.
START and STOP times are entered in the same
manner as when programming a button selection.
Confirmation of setting
Back to MAIN MENU
Programming a Button Selection
Programming the IDLE Function