Step, Question or comments, Quick start guide – Mr. Coffee BVMC-ECMP55 User Manual
Page 3: Priming the pump, Prepare for brew, Caution: steam pressure

3. If an extension cord is used the marked electrical
rating of the extension cord must be the same as the
product. The extended cord must be arranged so
that it will not drape over the counter top or tabletop
where it can be pulled on by children or tripped over
accidentally.
CAUTION: STEAM PRESSURE
In order to avoid possible burns to body parts and/or other
injury from hot steam and water or damages to the unit,
never remove the water reservoir or the brew Basket while
your MR. COFFEE
®
espresso/cappuccino maker is brewing
coffee or frothing. The control knob should be in the OFF
before you can remove the brew basket to make additional
cups of coffee. If you need to add more water to the
reservoir, please turn the control knob to the OFF position.
Take off the reservoir lid, then fill water in the reservoir
QUESTION OR COMMENTS
Cal us at 1-800-672-6333 (US) or visit us on the web
www.mrcoffee.com
E3
E4
Quick Start Guide
1
Add water to the water
reservoir.
2
Turn the ON/OFF
Switch ON.
3
Press the Brew/Steam
Switch to the BREW
“ ”
position and wait for Brew/
Steam Indicator Light to
become solid green.
4
Place a cup underneath
the brew head and turn
the control knob to the
BREW
“ ”
position.
5
After 30 seconds turn
the knob to the OFF
position. (Some water
and/or steam may
release during process)
1
Fill the filter holder
with espresso
ground coffee.
2
Use tamping tool to
gently press down
on the grounds to
ensure a flat level
surface.
3
Lock the filter arm
into the espresso
maker.
4
Fill the water
reservoir with
water and place
a cup under the
espresso outlet.
STEP
1
Priming
the
Pump
STEP
2
Prepare
for
Brew
(ONLY NEEDS
TO BE DONE
BEFORE USING
FOR THE FIRST
TIME)
2
3
3
4
4/5
1
2
4
BVMC-ECMP55_13ESM1.indd 5-6
2/22/13 2:26 PM