Motion Sound KM-12 User Manual
Page 3
3
-REAR PANEL CONNECTIONS-
Line Output: A balanced XLR line output is provided for both channels for connection to a PA
system or a Motion Sound SW-15 Subwoofer.
Microphone Input: The microphone input is for standard XLR balanced inputs the volume control
is routed through the Channel One’s EQ channel controls.
-SERVICE-
Motion Sound or an authorized service center must perform all maintenance. In the unlikely
event of failure remove as follows:
Grill: Remove the front grill by unscrewing the four screws.
Speaker: Remove the 12” speaker screws and carefully remove the speaker. Detach the four
speaker wires (note polarity and location).
Amplifier: Remove the 8 outside screws and slide the chassis through the speaker cutout hole.