Monster Remote Access RF/IP Card 100 - Manual (Page 4)

ENGLISH
Tools
You will need a jeweller’s screwdriver (#0 size) to remove and attach
the PowerCenter SNMP slot cover plate screws (not included).
Connectivity Options
The Monster Remote Access RF/IP Card 100 provides two methods to connect
the PowerCenter to the broadband router:
1. Ethernet connection using CAT-5 Ethernet cable directly to the broadband
router (or facility Ethernet infrastructure). This option requires bringing
Ethernet cable directly to the location of the PowerCenter.
2. Wireless connection using 900MHz RF (Radio Frequency) wireless protocol to
Monster Ethernet Gateway (Gateway sold separately). This option is available
for facilities that prefer wireless connection, or cannot be wired for Ethernet.
The Monster wireless protocol is capable of covering a 5,000 square foot wood
frame facility with a single Ethernet Gateway. More Ethernet Gateways
may be required for larger facilities.
Select your connectivity option and make sure to have the materials available
(Ethernet cable and jacks, or Ethernet Gateway) prior to installation.