Monster HTS 1700 - Manual (Page 22)

16
TROUbleSHOOTInG
Symptom Possible Cause Remedy
The PowerCenter is
not receiving power . The PowerCenter
is not turned On . • Turn the PowerCenter switch on.
• Make sure the PowerCenter’s AC power
plug is plugged into a properly grounded
120 volts (nominal) wall outlet .
• In some households, a wall switch may need
to be thrown to make the wall plug active .
Try turning on the light switches located near
the wall unit .
Too many devices are
connected, causing an
overload, tripping the
Thermal Circuit Breaker . • Press the PowerCenter Thermal Circuit
Breaker button in to reset . Please allow
10 minutes before attempting to reset .
If you reset too soon, the breaker will
prematurely sense power overload
and not allow unit to operate .
• If the Circuit Breaker continues to trip, try
moving one or more components to another
PowerCenter . You may be drawing too much
current through one PowerCenter .