Mogar Music WINTUBE - Manual (Page 10)

4.1 CONTROLS
Fig.4.1 Front panel controls
1) MICROPHONE INPUT of CH1 allows connecting to the first channel almost every kind of
microphones or DI box.
2) This is the balanced LINE INPUT of the CH1 you can directly plug in Guitars, basses, key-
boards, midi-machines and so on.
3) The LOW CUT switch of CH1 cuts out over bass from the signal of this channel.
4) The LEVEL meter of CH1 allows continuous monitoring of the input level of this Channel.
5) The 48V PHANTOM power switch if pressed give phantom to both the Mic inputs.
6) The LEVEL meter of CH2 allows continuous monitoring of the input level of this Channel.
7) The LOW CUT switch of CH1 cuts out over bass from the signal of this channel.
8) This is the balanced LINE INPUT of the CH1 you can directly plug in Guitars, basses, key-
boards, midi-machines and so on.
9) MICROPHONE INPUT of CH2 allows connecting to the first channel almost every kind of
microphones or DI box.
10) The POWER ON switch is the main power switch and allows you switching on /off the
device.
11) LIMIT LED shows that the Limiter of the CH1 is working, this means that the input signal is
over passing the set Threshold (see Fig. 4.2)
12) The GAIN control of the CH1 allows the right setting of the input level of the signal of this
channel.
13) The GAIN control of the CH2 allows the right setting of the input level of the signal of this
channel.
14) LIMIT LED shows that the Limiter of the CH2 is working, this means that the input signal is
over passing the set Threshold (see Fig. 4.2)
10 – WIN PRE & WIN TUBE USER’S
MANUAL
1 2 3 4 5
11 12 13 14
6 7 8 9 10