Mogar Music PMS - Manual (Page 7)

6 - PMS USER’S MANUAL
ATTENTION!
If the unit is damaged, please do not return it to us, but notify your dealer and the
shipping company immediately, otherwise claims for damage or replacement may
not be granted. The consignee must make shipping claims.
3.2 Rack mounting
The unit fits into one new standard “half rack” unit of space (1 3/4"). Please allow at
least an additional 4" depth for the connectors on the back panel. Be sure that there is
enough air space around the unit for cooling and please do not place the unit on high
temperature devices such as power amplifiers to avoid overheating. It is also possible to
fit the unit into one standard rack unit of space (1 3/4") using the optional RK100 rack
adapter that you can buy from your Dealer.
3.3 Mains voltage
Before you connect your unit to the mains AC socket, please make sure that your local
voltage matches the voltage required by the external power supply of your unit! In case
that the label of your Unit transformer require a voltage different from the one that you
have in your Country do not connect it to mains and contact your Dealer.
3.4 Audio connections
If possible, connect the unit to other devices in a balanced configuration to allow for
maximum interference immunity.
Please ensure that only qualified persons install and operate the unit.
During installation and operation the user must have sufficient electrical contact
to earth. Electro-static charges might affect the operation of the unit!