MK Products Prince XL/Spool Gun - Manual (Page 10)

Prince™ XL/Spool Gun - Owner's Manual Page 10
Section 4 Contact Tips - Water Cooled Barrel Assembly
Section 6 Gas Cups - Water Cooled Barrel Assembly
Section 5 Spring Loaded Contact Tips -
Water Cooled Barrel Assembly
Spring Loaded Contact Tips
for Prince XL Water Cooled Torch
P/N Tip I.D. Tip Length
621-0202 0.044"(1.1 mm) 1-5/8" / 41.3 mm lg
621-0203 0.053"(1.4 mm) 1-5/8" / 41.3 mm lg
621-0204 0.060"(1.5 mm) 1-5/8" / 41.3 mm lg
621-0205 0.075"(1.9 mm) 1-5/8" / 41.3 mm lg
Note: To remove contact tip when using full water cooled gas cup (P/N 621-0065) the contact
tip removal tool (P/N 931-0002) must be used.
Contact Tips for PrinceXL Water Cooled Torch
Wire size Tip I.D. Arc Tip Length Part No.
.030"(0.8mm) .040"(1.0mm)
Spray
Short
1-5/8"(41.3mm)
1-7/8"(47.6mm) 621-0158
621-0165
.035"(0.9mm) .044"(1.0mm)
Spray
Short
1-5/8"(41.3mm)
1-7/8"(47.6mm) 621-0157
621-0166
.045"(1.2mm) .053"(1.35mm)
Spray
Short
1-5/8"(41.3mm)
1-7/8"(47.6mm) 621-0161
621-0167
.052"(1.4mm) .060"(1.5mm)
Spray
Short
1-5/8"(41.3mm)
1-7/8"(47.6mm) 621-0162*
621-0168
.063"(1.6mm) .075"(1.9mm)
Spray
Short
1-5/8"(41.3mm)
1-7/8"(47.6mm) 621-0163
621-0169
.063"(1.6mm) .085"(2.16mm) Spray 1-5/8"(41.3mm) 621-0164
.093"(2.3 mm) .113"(2.8 mm) Spray 1-5/8"(41.3mm) 621-0215
* Standard - furnished with torch
To remove contact tip when using fulll water cooled gas cup (P/N 621-0065) the contact tip
removal tool (P/N 931-0002) must be used.
Water Cooled Cup for Prince XL Water Cooled Torch
Cup Size Cup I.D. Cup Length Part Number
No. 10 5/8" (15.9mm) 3" (76.2mm) 621-0065
Air Cooled Cups for Prince XL Water Cooled Torch
Cup Size Cup I.D. Cup Length Part Number
No. 6 3/8" (9.5mm) 1.43" (36.5mm) 621-0170
No.8 1/2" (12.7mm) 1.43" (36.5mm) 621-0159*
No. 10 5/8" (15.9mm) 1.43" (36.5mm) 621-0160
*Standard - supplied with torch
To use air cooled gas cups, you must order a cup retaining nut (449-0193*) and a water cooled
cup adaptor (621-0101*)