Deutsche Telekom 704PC - Manual (Page 57)

49
Configuration via Telephone
You can set a charge limit (charge account) for every internal line, which you can then
activate and deactivate as the need arises. When the limit has been reached, no fur-
ther outgoing external calls are possible on this line (the subscriber hears a busy
tone). The pre-programmed emergency numbers can still be dialled, however.
Lift the handset. The configuration mode is active and you hear a special internal
dialling tone.
Select the code digits 44.
Select the number of the internal line (11 - 14) for which you want to limit the charge,
and press the star key.
Enter the charge limit (always enter four digits, two for the euros, two for the cents,
e.g. "1050" for 10.50 euros), and press the hash key. You hear a positive acknowl-
edgement tone.
Replace the handset.
Setting a Charge Limit
Lift the handset. The configuration mode is active and you hear a special internal
dialling tone.
Select the code digits 42 to activate
or
the code digits 43 to deactivate the charge limit.
Select the number of the internal line (11 - 14) and press the hash key. You hear a
positive acknowledgement tone.
Replace the handset.
Activating/Deactivating the Charge Limit
b
4 4
t *
t # q
d
b
4 2
4 3
t # q
d