MK Products Prince XL Fronius Com ACWC - Manual (Page 14)

Prince ® XL Fronius Compatible Gun Owner's Manual - Page 7
Gas Valve Removal Tool
Gas valve removal is performed by using P/N 931-0105 Gas Valve Removal
Tool. This multifunctional tool has been slotted on one side to encompass
and conform to the gas valve stem and seat into the slotted gas valve body
as seen in Figures 1 and 2. Removal of the gas valve can be accomplished
by turning the gas valve tool counter clockwise. Reinstall by turning clock-
wise. The tool doubles as a bottle opener.
Section D Maintenance
Maintenance of the gun will normally consist of a general cleaning of the wire
guide system, including tubes, drive rolls, and conduit at regular intervals.
Remove spatter build-up from inside of nozzles with a hardwood stick.
The only parts on the gun that are subject to normal wear are the conduit,
contact tips, gas cups, drive and idler rolls and barrel liners. A supply of
those parts should be maintained on hand.
If repairs do become necessary, qualified shop maintenance personnel can
easily replace any parts.
Your Cobramatic
® System is designed to provide years of reliable service.
Normal wear and component failure may require occasional service.
The number of units in operation and the importance of minimal “down time”
will determine to what extent spare parts should be stocked on hand. See
the “Recommended Spare Parts List” for the most commonly replaced parts.
Recommended Spart Parts List
Part Number Description
615-0620-15 Conduit 15’
615-0620-25 Conduit 25’
615-0620-35 Conduit 35’
615-0620-50 Conduit 50’
005-0661 Potentiometer Kit
003-0568 Micro Switch
005-0633 Handle Kit
511-0101 Drive Roll
005-0686 Idler Roll Kit
325-0206 Idler Roll Screw
333-0082 Idler Roll Washer
003-0585 Trigger Assy.
431-3117 Door
Micro Switch Assy
(switch with leads)
003-0568
Idler Roll
005-0686
Drive Roll
511-0101
Maintenance Tools
Tool Part Number
Gas Valve Removal Tool 931-0105
Contact Tip Removal Tool 931-0044
Drive Roll Removal Tool 931-0100
Gas Valve Removal Tool Figure 1 Figure 2