MK Products Prince XL Fronius Com ACWC - Manual (Page 13)

Prince ® XL Fronius Compatible Gun Owner's Manual - Page 6
12” Curved, 45° Water Cooled Barrel Assembly 400 Amps............... 003-2319
12” Straight Water Cooled Barrel Assembly 400 Amps ..................... 003-2318
18” Straight, Air Cooled Barrel Assembly .......................................... 003-2334
18” Curved, 45° Air Cooled Barrel Assembly ..................................... 003-2335
18” Straight Water Cooled Barrel Assembly 400 Amps ..................... 003-2320
18” Curved, 45° Water Cooled Barrel Assembly 400 Amps............... 003-2321
12” Flex Air Cooled Barrel Assembly, 200 Amps .......................... 003-2495-12
18” Flex Air Cooled Barrel Assembly, 200 Amps .......................... 003-2495-18
24” Flex Air Cooled Barrel Assembly, 200 Amps .......................... 003-2495-24
36” Flex Air Cooled Barrel Assembly, 200 Amps .......................... 003-2495-36
Optional Kits
Insulated drive roll kits are used to prevent preheating of the wire which may
soften it and clog the liner. This picking up of current at the drive rolls rather
than at the contact tip is usually not a problem unless using too large of a
contact tip or excessively oxidized aluminum wire.
Insulated Groove Drive Roll Kit ...................................................... 005-0715
For .030" (0.8mm) dia. aluminum wire.
Includes insulated groove drive roll and insulated idler roll assy.
Insulated Groove Drive Roll Kit ...................................................... 005-0716
For .035" (0.9mm) dia. aluminum wire.
Includes insulated groove drive roll and insulated idler roll assy.
Insulated Groove Drive Roll Kit ...................................................... 005-0717
For .040" (1.0mm)dia. aluminum wire.
Includes insulated groove drive roll and insulated idler roll assy.
Insulated Groove Drive Roll Kit ...................................................... 005-0718
For .045" (1.2mm) dia. aluminum wire.
Includes insulated groove drive roll and insulated idler roll assy.
Insulated Groove Drive Roll Kit ...................................................... 005-0719
For .062" (1.6mm) dia. aluminum wire.
Includes insulated groove drive roll and insulated idler roll assy.
Prince
XL Fronius Compatible Handle Kit ..................................... 005-0633
Includes left and right handle with door, trigger and pin,and all
handle screws.
Barrel Insulator Replacement Kit ................................................... 005-0696
Optional Accessories
Conduits
Flat Spiral Steel Conduit for steel and cored wire. Standard with teflon
liner.
615-0621-6 ...................................................................................6ft./1.8m
615-0621-15 ...............................................................................15ft./4.5m
615-0621-25 ...............................................................................25ft./7.6m
615-0621-35 ..............................................................................35ft/10.7m
615-0621-50 .............................................................................50ft./15.2m
Optional nickle tube liner ................................................................431-2033
Snake Skin ® Velcro ® Closure Cover
Leather Snake Skin ® protective covers are now standard on all guns. You
may order replacement covers to protect the lead assembly of the gun when
the original factory cover becomes damaged or worn. The Velcro ® closure
makes it easy to replace in the field.
Snake Skin Cover 4ft (for 6ft leads)............................................. 931-0106
Snake Skin Cover 13ft (for 15ft leads)......................................... 931-0110
Snake Skin Cover 23ft (for 25ft leads)......................................... 931-0122
Snake Skin Cover 33ft (for 35ft leads) ........................................ 931-0132
Snake Skin Cover 48ft (for 50ft leads) ........................................ 931-0123