Microsens MS400940 - Manual (Page 5)

3
outside plant.
Hardware Description
The Power over Ethernet Splitter has three connection ports, one LED
indicator, and Dipswitch for voltage adjusting. We will description each in
following.
 Data In port: It is a RJ-45 Ethernet interface port for data transmit to
the PoE Splitter. It is for connecting with PoE injector.
The Data In port figure
 Data Out port: It is a RJ-45 Ethernet port and has a fix RJ-45 cable for
connecting with the Power device.
 Power Out port: It supports two types of power cable – 5.5 x2.0mm
and 5.5x2.5mm. These two types of DC power jack contain in package.
The Power Out port is for transmitting the power to the device that
powered by 5V, 7.5V, 9V or 12V.
Data Out and Power Out port figure
 LED indicator: one Power LED indictor for the system unit. It locates
on the topside of the Power over Ethernet Splitter.