Microsens MS655033X - Manual (Page 4)

Overview
Introduction
The Industrial Power over Ethernet Injector provides data and DC power
through the Ethernet cable to PoE-equipped devices, such as IP camera,
access point, PoE splitter or other equipment supporting IEEE 802.3at.
The injector is typically installed near the Ethernet switch. The figure
below presents the example for the Power over Ethernet Injector
application.
PoE Splitter PoE Injector
Power over
Ethernet
Ethernet
Power
Ethernet
Non-PoE AP
NB
Ethernet Switch
PoE Injector
Ethernet
DC Power Input
DC Power Input
PoE IP Camera
Power over
Ethernet
1