Microsens RS-232 - Manual (Page 8)

7
2-4 . LED Description
LED Color Function
FX (LNK/ACT) Green
Lit when fiber connection is
good
Blinks when fiber data is
present
DATA
(Copper)
Green
Lit when Copper data is
present
PWR Green
Lit when +5 V power is
coming up
Note: According to LED Description, check which part is out of work.
Reset this product by power off/on.
2-5. DC Jack and AC-DC Power Adapter
The DC jack's central post is 2.5mm wide and it conforms to the DC
receptacle(2.5mm).
＊ AC-DC adapter (VOUT +5 VDC) is required.
3. Technical Specifications
• Standards: RS-232 TIA/EIA-232
RS-422 TIA/EIA-422
RS-485 TIA/EIA-485
• Network Interface: RS232 (SUB-DB9)
RS485/422 (SUB-DB9)
SC/ST Fiber Transceiver
∗ Any other fiber model, such as LC, BiDi, etc. is available upon request.
DC Jack :2.5mm
DC Input :+5V
(DC current: full load consumption 0.5 A)
Fig.9: DC+5 V Input Jack and dimension