Microsens MS40020x - Manual (Page 15)

13
Technical Specification
Fast Fiber Converter Module technical specification is as following:
Standard
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX/100BASE-FX
IEEE802.3x Flow Control and Back pressure
Connector
Fiber: Duplex SC, Simplex SC (WDM single mode)
RJ-45 Socket: CAT-3/5 (10/100Mbps) Twisted Pair
cable Auto MDI/MDI-X and Auto-Negotiation
Function Support
Switch
architecture
Store and Forward
Fiber parameters
Fiber Core:
Multi-Mode (62.5/125um, 50/125um)
Single-Mode (9/125μm)
Wavelength: 1310nm(Multi-mode)
1310nm(Single-mode)
1550nm(WDM, TX), 1310nm(WDM,
RX)
Fiber Distance:
Multi-Mode Fiber 2KM
Single-Mode Fiber (30 KM)
WDM (Single-Mode) 20KM
Transparent
packet
64 to 1518 Bytes for Non-VLAN Ethernet packet
Link Lost
Forward
UTPÎFiber: If UTP port link down, then converter
will forced fiber to link down.
Fiber Î UTP: If Fiber port link down, the media
converter will force UTP port to link down.