5 cable parameter, Technical specifications – Microsens MS400190 User Manual
Page 7
5
2-5 Cable Parameter
• TP Cable Limitations: Cat. 5 and up to 100m
• Fiber Cable Limitations:
Multi-Mode Fiber
62.5/125
µm
Multi-Mode Fiber
50/125
µm
Bandwidth
MHz-Km
Distance
Bandwidth
MHz-Km
Distance
1000SX
850nm
160
220m
400
500m
200
275m
500
550m
1000LX
1310nm
Single-Mode Fiber 9/125
µm is up to 10km
Note: 850nm, 1310nm ,1550nm is the wavelength of fiber transceiver
3. Technical Specifications
• Standards
:IEEE802.3z/AB 1000Base-T,
1000Base-SX/LX
• UTP Cable
:Cat. 5 cable and up to 100m
Fiber Cable
:
1000SX: 50/125, 62.5/125, or 100/140
µ
m multi-mode
1000LX: 8.3/125, 8.7/125, 9/125 or 10/125
µ
m single-mode
• LED Indicators :
PWR
FX LINK, FDX, TP LINK, ACT
• Data Transfer Rate:
2000Mbps/full-duplex
• TP Flow Control
: Nway auto-negotiation
Fiber Flow Control
: Nway at full-duplex mode
• Power Requirement
: 1A @
+5VDC above AC-DC Adapter
-10
° to 60°C
• Ambient Temperature : -10° to 60°C
• Humidity
: 5% to 90%
• Dimensions :
26.2(H)
× 70.3(W) × 94(D) mm (Fig. 7)
Note: For connecting this device to Router, Bridge, or Switch,
please refer to the corresponding device's Technical
Manual.