Microsens MS400089 User Manual

Page 8

6. LED Description

LED

Color

Function

FX LNK/ACT

Green

Lit when fiber connection is good
Blinks when fiber data is present

TP LNK/ACT

Green

Lit when TP connection is good
Blinks when TP data is present

TP SPD

Green
Amber

Green Lit when TP speed is 1000Mbps
Amber Lit when TP speed is 100Mbps
Off when TP speed is 10Mbps

PWR

Green

Lit when

+5V power is coming up

PoE PSE-TP

Green

Lit when PoE feeding power is active

Red

Lit when PoE feeding power is disrupted
(In case of overtemperature/overcurrent )

Green

Lit when PD Class Type is Class 1

Green

Lit when PD Class Type is Class 2

15.4W

Green

Lit when PD Class Type is Class 0 or 3

7. DIP Switch and Reset Button

Reset :

Once S1-1, S1-2 is changed, please press this button to
have the setting taken effect.

S1-1 Bridge mode : Cut through (default) or Normal
S1-2 LFP

: LFP enabled(default) or disabled

S1-3 PoE ON/OFF : Enable(default) or disable

Note:
1. S1-1 :

Cut through mode support jumbo frame size max. up to
9216Bytes. Normal mode max. frame size up to 2048
Bytes

2. S1-3 :

Must be set to PoE ON while power supplies to PD.

Fig. 15 Reset button and S1—Bit 1, 2, 3 Configuration and Setting