Microsens Gigabit Ethernet 3-port Converter Module 1000Base-T/X - Manual (Page 4)

Gigabit Ethernet Access Module Page 4/6
MICROSENS GmbH & Co. KG - Küferstr. 16 - D-59067 Hamm - Tel. +49 (0)2381/9452-0 - Fax -100 -
www.microsens.com
Link Through
The Gigabit Ethernet Access Modul has the integrated "Link Through" functionality to
support the connection control.
The connection status of the fiber segment is forwarded to the twisted pair segment. In
due to this the twisted pair connection is switched off in a case of failure at the fiber
segment.
TP
Manage-
ment
alarm
No Link
Central side with
network management
office,
sub distribution,...
Converter with
Link Through
Remote
side
Safety notes
WARNING: Infrared radiation as used for data transmission within the fiber
optic, although invisible to the human eye, can nevertheless cause damage.
To avoid damage to the eyes

never look straight into the output of fiber optic components – danger of
blinding!

cover all unused optical connections with caps.

commission the transmission link only after completing all connections.
The active laser components used with this product comply with the provisions of
Laser Class 1.
Further documentation

Datasheet SFP-Transceiver → Newslink: 710109
Order Designation
Art.-Nr. Description Connectors
MS416195M 3 Port Gigabit Ethernet Access Modul,
managebeable 3x SFP Ports
3x RJ-45
MICROSENS reserves the right to make any changes without further notice to any product to improve reliability,
function or design. MICROSENS does not assume any liability arising out of the application or use of any product.
0807/TN